A fence is a mandatory attribute of any site. Its function is both to protect the site from the influence of outsiders and to decorate the house. In addition, the fence is necessary for land surveying and dividing the land into zones.
In this article we will talk about how to make a beautiful and, at the same time, affordable fence.
Construction materials
Undoubtedly, fences made of stone, brick, corrugated board or wood are especially popular, but these materials are not budget-friendly and not everyone can afford such a fence.
A fence made of chain-link or welded mesh that seems cheap at first glance will also hit the family budget, if you take into account the cost of transportation and installation of the fence. Despite this, the fence is still the face of the site, so you should not skimp on it.
There are many ideas on what a fence can be made from. If you still decide not to spend money on expensive fencing, then take note of fence options made from scrap materials, such as:
- Unnecessary pallets.
- Used slate.
- Various plastic parts, for example old containers.
- Production network.
- Waste from sawmill.
- Branches of bushes and trees.
- Unfinished boards.
- Scrap metal. If you have a car, you can visit scrap metal warehouses and purchase pipes, poles and crossbars there.
- Used brick, stone and concrete.
How to make a wicker fence for a flower bed
For a wicker fence, the main thing is to prepare suitable rods. The material can be cut in the spring, choosing the most flexible tree branches. If the fence is small, weaving can be made from branches of fruit trees and shrubs - apple trees, plums, pears, grapes, currants, etc. Process: stick stakes around the flower bed and braid them with twigs (through one peg, staggered in rows).
Stages of construction
How to build a fence with your own hands? So, the construction of the fence takes place in several stages:
Planning and marking. Before starting work, it is necessary to draw up a drawing of the fence indicating its dimensions and the location of the gate and wicket. Then we transfer the drawing to the construction site.
The boundaries of the future fence must be marked with pegs and twine stretched between them. Additionally, using pegs, you need to mark the location of the support pillars. The distance between them should be from 2 to 3 meters.
Foundation. If you are building a stone or brick fence, then keep in mind that such a massive structure requires a solid foundation. The approximate depth of the trench for the foundation is 70 centimeters and the width is 40.
Installation of support pillars. Laying fence spans.
After learning more about the stages of fence construction, you will know exactly how to make a fence correctly.
Brick fence for flower beds
You will need a little brick and mortar, but the fence will be solid and will last for a long time.
First, about the solution : mix 1 part cement with 3 parts sand, pour water in parts, stirring all the time. When the consistency of the mass becomes like a thick cream, the solution is ready.
- We mark the place for the flower bed.
- We tear off a groove of small depth (about 30 cm).
- We fill the ditch with sand and crushed stone.
- Fill with solution.
- The result was a light foundation. You can not fill the foundation, but simply pour crushed stone (drainage) and start laying the brick walls of the fence in the recess.
- 2-3 rows of bricks above the ground, and the fence is ready.
Exactly the same fence can be made from any building blocks.
More fences for flower beds made of brick and stone
Corrugated fence
A fence made of a material such as profiled decking will favorably emphasize and highlight your site among others and reliably protect it from strangers. How to make a fence from corrugated board?
Installing a fence made of corrugated sheets does not cause difficulties even for beginners. Installing such a fence is completely justified due to the advantages:
- Simplicity of technological work during installation.
- Strength of the material.
- Long service life.
- Modern style.
A self-made fence made of corrugated sheets is an ideal option for a personal plot.
Advantages of installing decorative fencing yourself
The first advantage of erecting a fence is the originality of the idea, which can be realized using one of the inexpensive materials - wooden slats or branches. In addition, the advantages are:
- delimitation of space - the entire site will be divided into separate functional zones;
- safety of vegetation - the first shoots grown with such love can be damaged by carelessness of pets or guests, and the fence, even if low, will save your seedlings;
- grooming - especially for summer residents whose main hobby is flower beds and flower beds;
- unity of style - decorative fences that are the same for all zones will emphasize the concept of landscape design.
Price
The cost of erecting a fence depends on many factors. Here are some of them:
- Foundation dimensions. The amount of mortar that will be used for construction depends on this parameter. Accordingly, the heavier the fence, the more massive the foundation must be laid.
- Fence size.
- Material for construction.
- Installation. You can save a lot on installing a fence if you decide to build it yourself, without the help of specialists.
In order to find out how much it will cost to make a fence, you need to determine its exact dimensions and choose the material for construction.
