Clematis - planting and care in open ground, methods of propagation and secrets of lush flowering

Most often, clematis is cultivated in the ground, but it will also feel quite comfortable as a houseplant.

It is usually planted in pots, boxes or tubs (at least 60 cm high), placed in a well-lit place. Several holes must be made in the bottom of the container, then drainage and fertile soil are filled in, and after planting, a support for the plant must be installed. To provide the roots with coolness and shading, low-growing “neighbors” are planted in a pot of clematis.

Variety “Polish Spirit” combined with hyssop, rose and hosta

Clematis planting and care in open ground.

Indeed, choosing your variety from this variety of luxurious flowers is quite difficult. One is more beautiful than the other - huge, bright, terry, each simply strives to outshine the others in beauty. Each type promises to turn our dacha into a real Garden of Eden! After all, any variety looks beautiful both on its own and in combination with other flowers, especially roses.

One of the most beautiful and sought-after varieties of clematis is Clematis Manchurian. This beautiful vine is actively used to decorate the landscape of the yard by gardeners all over the world, but only in the last few years has gardeners in our country paid attention to it. Thanks to its snow-white beauty and ease of care.

Clematis Manchurian (photo)

But, because We plan not just to admire the flower, but to grow it, then we need to know the features of caring for it. It is best to buy seedlings in pots, and when choosing a variety, we first look not at the shape of the flower, but at its group. It is she who will determine how we prune it, how to cover it for the winter and when to expect it to bloom.

Types of clematis by group and pruning method:

First group. The liana will produce flowers only on last year's shoots. Therefore, if you cut off all the old shoots in the winter or spring, you will never see flowering. Flowers from this group are the most luxurious, fashionable and amazing, but they definitely need to be covered for the winter.
Second group. In these varieties, flowers appear both on last year's shoots and on new shoots. But, if the variety is double, double flowers appear only on last year’s shoots. Only simple-shaped inflorescences appear on young shoots and with a short break after the first flowers on old shoots.
Third group. Flowers appear only on young shoots. There is no need to cover it - I cut it almost to the root and that’s it. These species are the most unpretentious - they are ideal varieties for beginners, because... Caring for the liana is simple and straightforward. And although there are almost no terry species in this group, believe me, there is plenty to choose your treasure from.

Variety ERNEST MARKHAM. Group 3, height 2.5 m

What to consider

When choosing a plant to decorate your territory, looking at a photo of clematis, it is difficult to make a choice. After all, all these flowers are so beautiful. The basic classification according to the flowering time of the plant will help you understand their diversity:

Blooms in May-June: Barbara Jackman.
In July: Biz Jubilee, Rouge Cardinal.
In the fall: Miss Bateman, Pilou, Gypsy Queen.
Bloom all summer: Burning white clematis, Multi blue.

When choosing the type and variety of clematis, you also need to consider the following:

perennial plant or annual;
large or small flowered;
terry or simple bowl type;
bush height or vine trunk length and stem type;
type of pruning.

For self-propagation, use clematis seeds, cuttings, layering and parts of a divided bush.

Shades of colors play a great role in the design of the site:

white flowers have: John Paul ll, Arctik Queen, Jeanne d'Arc;
lilac flowers in such varieties as: Victoria, Forest Opera, Fantasia;
red: Ernest Markham, Monte Cassino;
yellow flowers: Yellow Queen, Love Radar, Golden Tiara;
pink: Josephine, Pink Fantasy;
blue: Turquoise, variety H.F. Young.

There are varieties that can withstand and easily tolerate frosts: Cosmic Melody, Nikolai Rubtsov, Ville de Lyon.

Planting clematis - tips for beginner gardeners

When you solve the problem of how to grow healthy clematis, remember that it does not tolerate transplantation at all, so immediately plant them in a permanent place. And in this place it can grow for up to 40 years, provided that you have prepared the planting hole correctly.

Clematis Comtesse de Bouchaud photo

How to preserve a seedling before planting.

If you bought your plant in the supermarket in early spring and still need to get to your dacha, or perhaps it’s still too cold to plant, you need to make friends with the plant at home.

Place the pot with the seedling on the sunniest windowsill. Now we must disinfect the soil in the pot, because... here it’s better to play it safe than to hope that it will pass - you don’t want to then treat diseases in our vine. We use Fitosporin for the soil. And in order to support the small vine itself, we use spraying with Epin solution. And for the roots we will buy vermicompost (instructions on the label). We repeat these procedures every ten days.

How to plant clematis yourself correctly.

A seedling in a pot can be transplanted into the soil after the night frosts have passed. Before planting, the pot with the plant should stand outside in the shade for a couple of days to adapt.

The main thing to remember is that you need to dig a hole for it that is wide enough and deep enough - almost the same as for planting an apple tree 60x60x60 cm. If you have close groundwater, do not forget to put a 10-12 cm layer of gravel or broken brick at the bottom of the hole so that The clematis roots did not rot.

Everything depends on how the root system of the plant feels: abundant flowering, brightness of flowers, number of new shoots and buds. And if the root system grows well and develops stably, then everything will be fine. It is necessary to add peat, humus and turf soil to the planting hole, and be sure to add a glass of ash. Mix this nutrient mixture in the pit and compact it lightly. We plant the seedling in a hole at the same level as it grew in a purchased container - the roots cannot be buried too deep.

Clematis Etoile Violette photo

Advice. If you want to get a bush with lush flowering, then you need to take care of the intensive formation of roots. To do this, make a hole in the middle of the hole 10 cm below the general level and plant a seedling in it. At the same time, pour a little sand onto the root collar of the vine to prevent it from being damaged by putrefactive fungi. During the summer, we gradually pour fertile soil into the hole until it is completely equal to the general level of the planting hole. This way we simulate the formation of roots, and with a strong root system the bush will be healthier and there will be more shoots.

Where to plant clematis.

Wet, swampy soils are completely unsuitable for the plant, so we exclude areas where there is stagnant water or water from roof drains for planting them. Such places guarantee fungal diseases and death of the vine. Also, you should not plant the vine near large trees - the roots of the plant are large and will begin to compete with the huge roots of the tree.

I would like to remind you that the flowers of the vine love a sunny place, and the roots love the shade. Therefore, it is good to plant low-growing flowers or ornamental grasses next to it. For example, hostas are excellent companions for vines. Another option is to mulch the roots. Pine needles, sawdust or straw are ideal as mulch.

Rutary

A garden composition of snags, stumps and old tree trunks decorated with flowers is called rutarium (from the English root - root). This option for decorating a flower garden is popular not only because of its impressive appearance, but also because of its low cost: everything you need for a rutaria can be found right on a country plot or in the nearest forest.

Having chosen an unusually shaped wood material, treat it with a rot-protective agent. Place a snag or stump in the garden so that the future flower garden looks appropriate. Rutarium looks harmonious:

at the entrance to the garden;
by the pond;
next to the gazebo;
in the far corner of the garden (especially oddly shaped driftwood).

To make an unusual flowerpot from a stump, remove the core, treat the tree with a protective agent, add soil and plant a plant inside the hole.

A “blooming” stump looks charming and attracts attention

Chamomile, periwinkle, fern, phlox, cornflower, petunia, and marigold are ideal for decorating a rutaria.

How to make a flowerbed from a stump - tips and secrets Is it possible to give a cut tree a second life? Yes, if you arrange a small flower bed with bright and beautiful flowers in the stump.

How to feed clematis

Clematis Hania photo

The plant throws out a large mass of flowers over the course of a season, so the bush cannot do without serious feeding. Once every 10 days it must be supported with fertilizers that promote lush flowering. These are Agricola for flowering plants, Agricola Fantasy, Grow-Up, Effecton for flowering plants.

In the fall, be sure to feed the plant in winter: 1 tbsp. spoon of superphosphate and 1 tbsp. spoon of potassium sulfate per 10 liters of water - move carefully. Water one bucket of this solution per adult plant, then next spring the flowers will bloom faster and will delight you until the fall.

Pest and disease control

No less dangerous for clematis are pest invasions, such as:

Aphid. It settles on the underside of leaves, feeds on their juice and leads to drying and curling. To eliminate it, spraying with “Fitoferm” (2 mg per 1 liter of water) helps.
Spider mite. Causes white spots to form on the bottom of leaves and cover the plant with cobwebs, causing it to appear weakened. Insectoacaricides and acaricides (toxic drugs diluted at 1 mg per liter of water) are considered effective means of combating it.
Slugs. They eat leaves and stems at night. Against them, ammonia is used (2 tablespoons per liter of water), which is used to treat the plant.

Slugs can be collected manually after dark

Tricks of experienced gardeners for lush flowering.

To grow beautiful clematis, you need to be aware that they are real gluttons, they should not be fed, but fed regularly and plentifully!

When to feed clematis. Fertilize the vine once every 10 days with small portions of fertilizer, always in liquid form. We begin fertilizing in May, when shoots begin to grow.
What to feed:
cow manure in a ratio of 1:10, or
bird droppings in a ratio of 1:15 or
2 tablespoons of vermicompost per 10 liters of water.

We use one bucket of solution per bush.

How to fertilize. Alternate mineral fertilizers with organic ones. When the buds appear, give organic and mineral fertilizers at the same time.
We protect from pests. If the soil is acidic, to prevent wilt disease, you need to deacidify it with lime milk (200 g of lime per 10 liters of water). Ash is also suitable for these purposes.
We strengthen the plant. These garden vines love growth stimulants - so spray them with Epin extra once every 10 days. This protects them from stress, helps them successfully survive spring frosts and makes shoots grow more actively.

Video description

This video tells you how to properly water and feed a flower
. Since clematis absorb many useful elements from the soil, sometimes it is necessary to fertilize them with fertilizers, which will be well reflected in the density of flowering and the general appearance of the flower. But you need to know that fresh manure and acidic peat cannot be added to the soil, this can kill the roots. Instead, you can add mineral fertilizers (for example, superphosphate) and ash to the soil.

Ash for fertilizer Source gardenreview.ru

How to propagate clematis by cuttings and shoots

There are three ways: cuttings, shoots and dividing the bush.

Clematis Hagley Hubrid photo

Propagation by cuttings. We prepare cuttings at the moment of bud formation, place them in Kornevin’s solution and, when roots appear, plant them in loose soil. Keep in mind that the average percentage of root rooting ranges from 10 to 60%, depending on the variety.

The method of propagation by shoots gives a higher percentage of rooting. Some of the vine branches, falling to the ground, begin to form roots. If at this time, without cutting off the shoot from the branch, you place it in the soil in a peat pot, then in a month you will be able to separate a healthy rooted seedling from the main bush. It is important to water the seedling in the pot abundantly.

Dividing a bush involves breaking an old bush with a shovel into several parts and planting each part in a new place.

How to prune clematis to produce more flowers

The liana definitely needs support, and the mesh cells must be large enough - up to 15 cm, then it is easy to remove the liana from them, trim it and cover it for the winter.

Clematis Blue Angel photo

If you have a plant for the first year, then in the fall it is cut off almost completely - leaving one bud above the ground. This way we stimulate the bush to form new roots and shoots. All subsequent years, with the help of proper pruning, we continue to shape and strengthen it.

You might be interested in how to choose a rotary hammer for your home.

How to prune clematis of the first group , which form flowers only on last year's branches: in the fall we remove the vine from the support, if the bush is thickened, we cut off some of the shoots to the roots, we also cut out weak thin shoots, and cut all other shoots to a height of 1 to 1.5 m.

How to prune clematis of the second group , which form flowers both on last year’s shoots and on new shoots: in the summer after flowering, we cut off the flowering part of the old shoot, in the fall we cut out thickened and weak shoots, trim the remaining shoots at a height of 1-1.5 m, then shorten some of the shoots are cut in half again and some are cut very short - this is how we form a lush bush for next year.

How to prune clematis of the third group , where our flowers will only be on young shoots, consists in cutting off the shoots almost completely - up to the first bud.

If the new seedling you bought is of a group unknown to you, prune it as for the second group, and this way you can determine the group of your vine.

Do-it-yourself country pond

The country pond will become a bright decoration of landscape design. Creating your own pond with your own hands will not be particularly difficult if you adhere to the general rules of execution. The main point is choosing a location

Factors to consider when choosing a location:

No direct sunlight. They can drain the pond, promote the growth of harmful bacteria, mud and water bloom.
The absence of large trees nearby, whose roots can damage the frame of the garden lake, and falling leaves and branches will clog the water.

Country garden decor idea

Decorating a country garden with flowers

Landscape design of a dacha

The material used to make the pond is also important. The modern building materials market offers many options for an artificial pond. The most popular are polyvinyl chloride form and butyl rubber (service life 35-50 years);

The finished form of the reservoir is more expensive, its advantage is that it saves time on preparatory work: it is enough to simply dig a pit of the required size and shape and place the base of the pond in it. The film solution is more economical and allows you to experiment with the size and shape of the reservoir.

Garden decor

Beautiful decor of a summer cottage

Step-by-step description of a country pond with a film base:

Digging a pit. First, terraces of 0.3 * 0.2 m are dug, where 0.3 m is the depth and 0.2 m is the width. After that is the main bowl.
To secure the base film, it is necessary to dig a small ditch around the perimeter of the reservoir, 0.15 m deep.
Level the bottom and clear it of stones.
Cover 5 cm of the bottom with clean sand and cover with geotextile cloth.
Lay the base film around the perimeter of the pond, leaving a free edge of about 50 cm, secure the edges with heavy objects.
Fill the pond with water and leave for a day so that the film completely takes the shape of the future reservoir.
Trim off the excess film, leaving 25 cm of free edge for the blind area (its width is approximately 60 cm), which is laid on cement mortar.
Decorating a country pond.

The decor of a pond may include creating a fountain, populating it with fish and aquatic plants, installing benches or a barbecue on the shore.

Country garden decor idea

Decorating a country garden with flowers

Landscape design of a dacha

Do clematis need to be covered for the winter?

In order to prevent freezing of the lower bud and roots, these vines need to be protected from frost. Therefore, before covering the shoots, we remove all the leaves from them to prevent rotting. Then we remove the mulch at the base of the bush and fill the neck of the vine with compost or peat. After this, we lay out the stems in a circle in a ring, fasten the stems to the ground with thick wire clips, cover the top with mulch and cover with waterproof material, leaving holes for ventilation. In early spring, we free the shoots and tie them to a support.

For all their beauty, clematis frighten some summer residents with the difficulties of growing and caring for it. But, if you care for this amazing liana correctly, then you will be able to grow wonderful and luxurious flowers in the country, which look especially beautiful paired with climbing roses.

Geometric flower beds

There are a large number of standard perennial flower bed designs. Regardless of the shape of the flowerbed, bright and tall plants should be planted in the center, medium-sized flowers in the middle, and low-growing ones at the edges.

Flowerbeds are usually designed in the shape of one of the following geometric shapes:

Rectangle. Such flower beds are distinguished by their clarity of shape. By combining flowers, you can make different designs.
Oval. Combining different types of plants allows you to create fascinating designs in your flowerbed.
Circle. A round flowerbed in a country house is very popular because this shape makes it easier to care for plants.
Triangle. Such flower beds are quite rare, but they can be placed where there is not a lot of free space.

Recently, another common option for flower beds is planting plants in boxes up to one meter high. They are more difficult to create, but there will be no problems with weeds and flower care.